 |
RULES FOR LATE MODEL AFX NON-MAG BODIES LATE MODEL STOCK CAR RESIN CASTSUCH AS FANDANGO , MOONSTONE , HOT LAPS MAY BE LIGHTENED MAY BE LOWERED MUST RETAIN ORIGINAL APPEARANCE NO LEXAN BODIES CHASSIS CHASSIS BE STOCK AFX NON-MAG NO BEARINGS OR BUSHINGS NO WEIGHTS OR HANDLING PANS CHASSIS MAY NOT BE CUT , SANDED OR DRILLED IN ANY WAY ANY PICK-UP SHOE AND SPRINGS NO SPEED STEER SHOES PICK UP SHOES MAY BE BENT TO ALLOW FOR BETTER CONTACT PICK-UP SHOE MAY NOT BE WEIGHTED NO SHUNT WIRES ALLOWED STEEL OR PLASTIC GUIDE PIN GEAR PLATE CLAMP MAY NOT BE BENT OR DIMPLED CAR MUST PASS EASILY THUR 1-5/16 TECH BLOCK MAGNETS MAGNETS MAY BE STOCK AFX , T-JET , JOHNNY LIGHTING , SUPER 2 OR AUTOWORLD NO POLYMER OR NEOS MAGNET MAY BE SHIMMED WITH NON-METALIC MATRIAL(TAPE) CHASSIS MAY NOT BE CUT MAGNETS MAY NOT BE SANDED OR CUT ARMATURES ARMATURES MUST BE STOCK , 5.5 OHM MINIMUM ARMATURES MAY BE BALANCED ARMATURES MAY NOT BE REWOUND OR DE-WOUND NO QUAD LAMS COMMUTATOR BRUSHES ANY CARBO BASED BRUSHES STOCK , JB , WIZARD NO SILVER BRUSHES GEARS ARMATURE PINION , IDLER AND DRIVEN GEARS MUST BE STOCK OR STOCK REPLACEMENTS NO LIGHTENED OR MODIFIED GEARS (DRILLED) GEARS MAY BE SOLDERED OR GLUE TO THERE SHAFTS GEARS MAY BE POLISHED OR LAPPED GEARS MAY NOT BE BEVELED DRIVEN GEAR RIVET MAY BE REPLACED WITH A SCREW CLUSTER GEAR MUST REMAIN STOCK WHEEL-TIRE-AXLES ANY FRONT WHEEL AND TIRE MAY BE USED ANY REAR WHEEL MAY BE USED SLIP ON REAR TIRE MAY BE USED NO SPONGE SILICONE |
